Product description:
Emits a Soothing Cool Mist
Mold & Mildew Resistant Tank
SilverClean Protection helps fight the growth of slimy mold and mildew on the surface of the water tank-a common problem with traditional humidifiers.
Large Capacity Water Tank
Optimize Comfort
Easy to Use
Additional Features
Please Note:
This item has been built to U.S. electronics specifications and may need additional modifications or converters to be used in countries other than the U.S. and Canada.
Made in CHINA
Directions for Use
Set Up
Select a firm, level, flat location-at least 6 inches (15 cm) from any wall or object for proper air flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Filling
Make sure unit is unplugged.
1. Separate the tank from the base of the unit.
2. Flip over water tank & open the tank lid, turning it to the left.
3. Pour cool, clean water directly into the tank. Do not pour anything but water into the tank.
4. Close the tank lid, turning it to the right. It is important to Firmly secure cap after filling the tank with water.
5. Attach the tank to the base of the unit by aligning night light (in base) with night light cap (in tank). Plug in.
6. Before turning on make sure there is water in the unit. Turn the Power Button.
Cleaning
Always unplug the unit before servicing in any way.
General Cleaning
Descaling
Ultrasonic Disk
1. Unplug unit.
2. Remove the tank & empty all water from unit base & tank.
3. Locate the ultrasonic disk on the inside center of the base unit.
4. Use Only the enclosed cleaning brush to gently clean disk & remove build up & deposits. Do not scrub or scrape the ultrasonic disk.
Clean the disk with the brush only. No other cleaning tool should be used. Brush Only.
If Scale Becomes Difficult to Remove with Brush
1. Fill the Base with: Mixture of 1 tsp. white vinegar & 1 tsp. water.
2. Let solution stand for 5 minutes.
3. With the vinegar in the Base, clean all interior surfaces with a soft cloth or brush to help remove scale.
4. Also check mist nozzle & mist tube in water tank. Clean as needed.
5. Rinse the Base thoroughly with water to remove scale & vinegar solution.
Warnings:
Read & Save the Instructions
Failure to comply with the warnings listed may result in electric shock or serious injury.
